Category Archives: Wood

Mahogany and Maple Pendulum Cradle

I just finished this pendulum cradle from Mahogany(basket)  and Maple (legs).   It is for my cousin’s new baby boy, Jasper.  It is colored with Watco Danish Oil (natural) and Bison Paste Wax.

This is the cradle at the hackerspace



This is Jasper.

Wooden Ukulele Dinosaur Transformer

So, I built this a while ago and it took quite some time to think up.   I knew I wanted it be a ukulele transformer, and I knew I wanted to make it out of wood.  First I took sheets of paper and cut them into the shapes I wanted to see if they would swivel/fold right, and it took me several tries, as in multiple pieces, such as arms or legs broke, split, or didn’t fit, so I had to try again.  It is made out of wooden pegs, one brass hinge, poplar, oak, maple, and mahogany.

In the end it turned out to be a pterodactyl/ukulele transformer

transformer-jul-22-2012-2-54-pm transformer-jul-22-2012-2-55-pm transformer-jul-22-2012-2-056 transformer-jul-22-2012-2-058 transformer-jul-22-2012-2-58-pm transformer-jul-22-2012-2-059 transformer-jul-22-2012-2-060 transformer-jul-22-2012-2-061 transformer-jul-22-2012-2-062 transformer-jul-22-2012-2-063 transformer-jul-22-2012-2-064 transformer-jul-22-2012-2-065 transformer-jul-22-2012-2-066 transformer-jul-22-2012-2-067 transformer-jul-22-2012-2-068

Turntable case/base

So, I managed to acquire an old Technics turntable that comes without a base, so I of course made my own.   the template was provided with the actual turntable, so I took some 1/2″ acrylic I had laying around and cut it to fit.    I them used some maple  to create a frame  with raised corners to go around the plate so that there is airflow.

turntable-jul-16-2012-7-19-pm turntable-jul-16-2012-7-019 turntable-jul-16-2012-7-18-pm turntable-jul-13-2012-1-54-pm turntable-jul-13-2012-1-42-pm turntable-jul-11-2012-7-50-pm turntable-jul-11-2012-6-40-pm turntable-jul-11-2012-6-31-pm turntable-jul-11-2012-6-30-pm


The Trumpet Lamp

This is a lamp I made out of an old trumpet.  The valves still worked, however the previous owner got married, and I needed to give him a gift, sooooo I took the trumpet and am giving it back as a lamp.  the third valve turns the lamp on and off.   GIVE ME USED UNWANTED INSTRUMENTS!  I will post a tutorial when I get the chance.  (The problem is that I gave this away, so I do not have it to film the tutorial)

dsc_2801 dsc_2799 dsc_2797


Folding Ukulele Stand

Sooo, the second attempt, but here is a folding ukulele stand I designed, cut and built.   I used 1/2″  birch plywood.    Two small hinges and then some half inch quarter round.  folds flat, then opens to hold the Uke.


dsc_2789 dsc_2795 dsc_2793 dsc_2792 dsc_2791 dsc_2790


Get every new post on this blog delivered to your Inbox.

Join other followers: